So, you’ve decided to take on the task of installing a residential toilet. Congratulations! Whether it’s for a bathroom renovation or just upgrading your old toilet, this is an essential skill to have as a homeowner. However, if this is your first time attempting this project, it can seem intimidating and overwhelming. But fear not! With the right tools and knowledge, you can tackle this project with ease. In this article, we will guide you through the process of installing a residential toilet step by step.
Planning and Preparation
Before jumping into any project, it’s important to have a plan in place. This not only helps save time but also ensures that everything goes smoothly. The first step is to choose your new toilet carefully. You want to make sure it fits within the space you have and meets your needs in terms of style, flushing power, and water efficiency. Once you have your new toilet, gather all the necessary tools and materials such as a wrench, pliers, wax ring, and bolts for installation.
Removing the Old Toilet
The next step is to remove your old toilet. Start by shutting off the water supply to the toilet. Then, flush the toilet and hold down the handle to completely drain out any remaining water. Next, disconnect the water supply hose from the bottom of the tank, and remove any bolts or screws holding it in place. Gently rock the toilet back and forth until it comes loose from the floor.
Gather the Necessary Tools
Equipping yourself with the right tools is crucial for a successful installation. Here is a list of the tools you’ll need:
- Wrench: A wrench is used for tightening and loosening nuts and bolts. You’ll primarily use it to secure the toilet to the floor.
- Pliers: These will be handy for gripping small items and bending or twisting wires or fasteners.
- Putty knife: You’ll need this for removing the old wax ring from the toilet flange.
- Level: A level ensures that your new toilet sits perfectly flat on the floor. An uneven installation can lead to leaks and other complications.
- Tape Measure: You’ll need a tape measure for precise measurements to ensure your new toilet fits perfectly in the space.
- Bucket and Sponge: These are needed for cleaning up and removing any residual water in the toilet bowl or tank.
Remember, before you start, ensure you have all these tools on hand to make the installation process as smooth as possible.
Installing the New Toilet
Now it’s time to install your new toilet. Start by placing the wax ring onto the flange on the floor, and make sure it is centered. Then, carefully lower the toilet onto the bolts on the flange, making sure it sits evenly. Once in place, tighten the bolts using a wrench. Next, reconnect the water supply hose to the bottom of the tank and turn on the water supply. Finally, test your new toilet by flushing it a few times and checking for any leaks.
Finishing Touches
To complete the installation, you’ll need to secure the toilet to the floor with caulk or grout around the base. This not only helps keep the toilet stable but also prevents any water from seeping underneath. You can also install a new toilet seat if desired, making sure to follow the manufacturer’s instructions for installation.
Conclusion
Installing a residential toilet may seem like a daunting task, but with the right tools and steps, it can be done easily and efficiently. Remember to carefully choose your new toilet, properly remove the old one, and secure the new one in place before testing