A broken shower arm can be a frustrating issue to deal with but fear not – with the right tools and a bit of know-how, you can tackle this problem yourself. In this guide, we’ll walk you through the steps on how to remove a broken shower arm safely and efficiently.
Assess the Damage
Before diving into the removal process, take a moment to assess the extent of the damage. Is the shower arm partially broken or completely detached? Understanding the situation will help you determine the best approach for removal.
Gather Your Tools
To successfully remove a broken shower arm, you’ll need a few essential tools:
- Adjustable wrench
- Pipe wrench
- Teflon tape
- Penetrating oil
- Plumber’s tape
- Pipe cutter (if necessary)
Make sure you have these tools on hand before starting the removal process.
Turn Off the Water Supply
Safety first! Begin by turning off the water supply to the shower. Locate the shut-off valve, usually found in the bathroom or basement. If there isn’t a dedicated valve for the shower, you may need to shut off the main water supply.
Remove the Shower Head
If the broken shower arm still has the shower head attached, remove it first. Use an adjustable wrench to loosen and unscrew the shower head in a counterclockwise direction. Set the shower head aside for now.
Loosen the Broken Shower Arm
Next, use an adjustable wrench to loosen the broken shower arm. Apply penetrating oil to the threads and let it sit for about 15 minutes. This will help loosen any corrosion or rust that may be hindering the removal process.
Use a Pipe Wrench
Once the penetrating oil has had time to work its magic, grab a pipe wrench to firmly grip the broken shower arm. Turn the wrench counterclockwise to unscrew the arm from the pipe in the wall. Be cautious and apply steady pressure to avoid causing further damage.
Cut if Necessary
In some cases, the broken shower arm may be too stubborn to unscrew. If that’s the case, a pipe cutter can be a lifesaver. Carefully cut the arm, making sure not to damage the threads on the pipe in the wall. After cutting, use a pipe wrench to remove the remaining piece.
Clean and Prepare for Installation
With the broken shower arm successfully removed, take a moment to clean the threads on the pipe in the wall. Use a wire brush or an old toothbrush to remove any debris or old plumber’s tape. Apply new Teflon tape to the threads – this will ensure a tight and leak-free connection.
Install the New Shower Arm
Now that the old, broken shower arm is out of the way, it’s time to install a new one. Screw the new shower arm into the wall by turning it clockwise. Use an adjustable wrench to tighten it securely but be cautious not to overtighten and risk damaging the threads.
Reattach the Shower Head
Finally, reattach the shower head to the new shower arm. Use an adjustable wrench to tighten it in a clockwise direction. Turn the water supply back on and check for any leaks. If everything looks good, congratulations – you’ve successfully removed and replaced a broken shower arm!
Final Thoughts
In conclusion, removing a broken shower arm may seem daunting, but with the right tools and a systematic approach, it’s a DIY task that you can conquer. Remember to prioritize safety, take your time, and follow each step carefully for a successful outcome. Enjoy your revitalized shower experience!