How to Measure PVC Pipe Length Between Fittings – Tips & Tricks

We will be covering how to measure PVC pipe length between fittings today. Are you planning on installing PVC pipe between fittings but don’t know where to start? Fear not, my dear reader!

Today, we’re going to go through a step-by-step guide on how to measure PVC pipe length between fittings. And to make things more fun, we’ll sprinkle in some puns and humor along the way. So grab your tools and let’s get started!

What Is PVC Pipe And When Should You Use It?

PVC stands for Polyvinyl Chloride, and it’s a plastic material that’s commonly used in plumbing and construction. It’s lightweight, durable, and easy to install, making it a popular choice for DIY enthusiasts and professionals.

You should use PVC pipe when you need a reliable and cost-effective solution for your plumbing or construction project. PVC pipe is ideal for drainage, water supply, and even venting systems. And the best part? It comes in a variety of sizes and fittings, making it versatile for any project.

What Tools Do You Need For PVC Pipe Fittings?

Before we start measuring, let’s make sure you have the necessary tools on hand. For this project, you’ll need the following:

  • A measuring tape or ruler
  • A marker or pencil
  • A saw (either a hand saw or a power saw, depending on your preference)
  • Sandpaper or a deburring tool

Make sure you have these tools ready before you start measuring, as they’ll come in handy during the installation process.

How To Measure PVC Pipe Length Between Fittings

Step 1: Measure the distance between the fittings

The first step is to measure the distance between the fittings. Use your measuring tape or ruler to measure the distance between the inside edges of the fittings. Make sure you measure from the center of the fitting, not the outside edge.

Step 2: Add the length of the fittings

Next, add the length of the fittings to the distance you just measured. The length of the fitting is the distance from one end to the other, including any threads or sockets.

Step 3: Add a little extra for safety

It’s always a good idea to add a little extra length to your measurement to ensure you have enough pipe to work with. We recommend adding about an inch or two to your measurement to account for any cutting errors or adjustments you may need to make during installation.

Step 4: Mark and cut the pipe

Now that you have your measurement, it’s time to cut the PVC pipe. Use your marker or pencil to mark the pipe at the length you measured, including the extra inch or two you added. Then, use your saw to cut the pipe at the mark.

Step 5: Deburr the edges

After cutting the pipe, use your sandpaper or deburring tool to smooth out any rough edges. This will ensure a snug fit when you insert the pipe into the fittings.

Best Practices Installing PVC Pipe Between Fittings

Now that you have your pipe cut to the right length, it’s time to install it between the fittings. Here are a few best practices to keep in mind:

  • Make sure the pipe is inserted all the way into the fitting. You should feel it “click” into place.
  • Use PVC cement to secure the pipe in the fitting. This will create a tight, leak-free seal.
  • Make sure the fitting is aligned properly before cementing it in place. Once the cement dries, it’s difficult to make adjustments.


Congratulations, you’ve successfully measured PVC pipe length between fittings! With a little patience and the right tools, you can easily tackle any plumbing or construction project. Just remember to measure twice and cut once (with a little extra for safety), and you’ll be on your way to a successful installation. Happy plumbing!